Best answer: Can you wind a bobbin from another bobbin?

Does the bobbin have to match?

You can use whatever color you want, but you don’t need to change color to match the top thread. Your bobbin thread should not show through the top layer of stitching. … Your bobbin thread should not show through the top layer of stitching. It will only be seen on the back of the item.

What happens if you use the wrong bobbin?

The short answer is YES! Filling a sewing machine bobbin too tightly can make a plastic bobbin bulge or stretch the thread if you are using a metal bobbin. This may be hard to see but can cause all kinds of problems. Plastic bobbins can become compressed in the center causing the bobbin to distort.

What causes bobbin thread to bunch up?

A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.

Why is my bobbin thread not catching?

Check the upper thread. – Check to see if your upper tension is too tight. … – Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread. – Make sure that the upper thread is threaded properly.

IT IS SURPRISING:  Best answer: Can a tailor make a shirt neck bigger?

Can I use overlock thread in my sewing machine?

On a sewing machine, serger thread is too weak and would produce a weaker seam and this could cause the fabric not to hold together at the seams very well. So it is best to stick with thread made for sewing machines.