Why is my sewing machine looping underneath?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
What is the most common cause of stitching problems?
|Incorrect or blunt needle point.||Change the needle.|
|Incorrect needle-to-thread size relationship.||Change needle or thread size as appropriate.|
|Feed dog sway.||Tighten the feed dog.|
|Poor fabric control, presser foot bounce.||Reset the presser foot. Change the feed mechanism.|
Why is my Singer sewing machine not stitching properly?
First, your needle may be dull or damaged and needs to be replaced. You should also check that you are using the correct needle for the type of fabric you are sewing. … If the needle is not inserted correctly, it will not be able to pull up the bobbin thread and will cause skipped stitches.
If your thread is pulled tight on the underside and not forming an even stitch then (counter-intuitively) it’s usually the top thread tension that’s wrong. Sometimes very lightweight fabrics such as sheers can get dragged down into the machine so it’s a good idea to use a straight stitch plate.
What setting should my sewing machine be on?
Most sewing is done in the 2.0 to 2.5 range. If you are foundation paper piecing, you may want to decrease your stitch length so that the paper tears away easier. Top stitching and quilting are usually done in the 3.0 to 3.5 range.
How do you tighten thread tension?
Changing Bobbin Tension
You should see a small screw on the flat/closed side of the bobbin case. Turning the screw a tiny bit counterclockwise will loosen the bobbin tension; turning it clockwise will tighten the tension.