Why is my sewing machine looping underneath?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
If the machine is threaded wrong, not only does it make the thread breaks easier, but is also more likely to create loose stitches. Check the threading to see if the thread has passed through the entire thread guides, the take-up lever and the eye of the needle. … Check out the details of threading the machine here.
Why is my sewing machine not stitching underneath?
The most common cause of a sewing machine skipping stitches is using the wrong type of needle for the fabric you are sewing. … Skipped stitches can also result if the needle is bent, which can occur if you are forcing the fabric, rather than let the machine feed it automatically.
How do I stop my sewing machine from bunching up?
A good cleaning may solve your bunching woes (check your manual for guidelines on cleaning and maintenance; your machine may also need to be oiled). To prevent stitch glitches, be sure to frequently dust underneath the throat plate and along the thread path, and to periodically clean and oil your machine.
If your thread is pulled tight on the underside and not forming an even stitch then (counter-intuitively) it’s usually the top thread tension that’s wrong. Sometimes very lightweight fabrics such as sheers can get dragged down into the machine so it’s a good idea to use a straight stitch plate.