How do you increase stitch length on a sewing machine?

– SINGER Quantum Stylist 9960 Computerized Sewing Machine

Why are my stitches not the same size?

When the bobbin case is threaded wrong, the upper thread and the lower one do not work in sync, forming uneven stitch or uneven feed among layers of fabric. Check the bobbin case and re-thread if needed. The thread should pass through the thread side slot in the case before being brought up to the needle.

What is a normal stitch length?

The average stitch length for mid-weight fabrics is 2.5 to 3 mm/10 to 12 spi. The average stitch length for fine fabrics is 2 mm/13 to 20 spi. For heavier fabrics, basting, or topstitching, use 4 to 5 mm/5 to 6 spi.

What setting should my sewing machine be on?

Most sewing is done in the 2.0 to 2.5 range. If you are foundation paper piecing, you may want to decrease your stitch length so that the paper tears away easier. Top stitching and quilting are usually done in the 3.0 to 3.5 range.

What is the standard settings for a Singer sewing machine?

Set the machine for straight stitch, with a stitch length of 3 to 3.5mm. Use a SINGER Topstitching Needle, size 90/14 for medium weight fabrics, or a SINGER Topstitching needle, size 100/16 for heavier fabrics. Sew 1/4″ – 3/8″ from the edge of the fabric.

IT IS SURPRISING:  How many stitches are on a football?

Why is my bottom stitch messy?

A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.

How do I adjust the stitch length?

Adjusting the stitch length (For models equipped with the stitch length dial)

  1. Raise the needle by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up.
  2. Turn the stitch length dial to adjust the stitch length that you want to sew.

How is stitch length calculated?

The formula is this: 25.4 divided by the metric length of the stitch such as 2.5 equals the number of stitches per inch. Here’s an example. To figure out how many stitches per inch a 2.5 metric setting will give you: 25.4 divided by 2.5 = 10.16 stitches per inch.